5302410020_A#conf
t
Enter
configuration commands, one per line.
End with CNTL/Z.
5302410020_A(config)#int
5302410020_A(config)#interface
se
5302410020_A(config)#interface
serial 1/1
5302410020_A(config-if)#ip
add
5302410020_A(config-if)#ip
address 172.17.17.1 255.255.255.252
%
172.17.17.0 overlaps with Serial1/0
5302410020_A(config-if)#ip
address 172.17.17.0 255.255.255.252
Bad
mask /30 for address 172.17.17.0
5302410020_A(config-if)#ip
add
5302410020_A(config-if)#ip
address 172.20.20.1 255.255.255.252
5302410020_A(config-if)#clo
5302410020_A(config-if)#clock
ra
5302410020_A(config-if)#clock
rate 9600
5302410020_A(config-if)#no
shu
5302410020_A(config-if)#no
shutdown
5302410020_A(config-if)#exit
5302410020_A(config)#int
5302410020_A(config)#interface
fa
5302410020_A(config)#interface
fastEthernet 0/0
5302410020_A(config-if)#ip
add
5302410020_A(config-if)#ip
address 192.168.1.1 255.255.255.252
5302410020_A(config-if)#no
shu
5302410020_A(config-if)#no
shutdown
5302410020_A(config-if)#exit
5302410020_A(config)#exit
5302410020_A(config)#router
ospf 10
5302410020_A(config-router)#net
5302410020_A(config-router)#network
172.20.20.0 0.0.0.3 area 0
5302410020_A(config-router)#net
5302410020_A(config-router)#network
192.168.1.0 0.0.0.252 area 1
OSPF:
Invalid address/mask combination (discontiguous mask)
5302410020_A(config-router)#net
5302410020_A(config-router)#network
192.168.1.0 0.0.0.255 area 1
5302410020_A(config-router)#exit
5302410020_A(config)#exit
5302410020_A#
%SYS-5-CONFIG_I:
Configured from console by console
5302410020_A#copy
ru
5302410020_A#copy
running-config st
5302410020_A#copy
running-config startup-config
Destination
filename [startup-config]?
Building
configuration...
[OK]
Pengaturan pada router 5302410020_B
5302410020_B#enable
5302410020_B#conf t
Enter configuration commands, one
per line. End with CNTL/Z.
5302410020_B(config)#int
5302410020_B(config)#interface se
5302410020_B(config)#interface
serial 1/0
5302410020_B(config-if)#ip add
5302410020_B(config-if)#ip
address 172.20.20.20.3 255.255.255.252
^
% Invalid input detected at '^'
marker.
5302410020_B(config-if)#ip add
5302410020_B(config-if)#ip
address 172.20.20.3 255.255.255.252
Bad mask /30 for address
172.20.20.3
5302410020_B(config-if)#ip add
5302410020_B(config-if)#ip
address 172.20.20.2 255.255.255.252
5302410020_B(config-if)#clo
5302410020_B(config-if)#clock
% Incomplete command.
5302410020_B(config-if)#clo
5302410020_B(config-if)#clock ra
5302410020_B(config-if)#clock
rate 9600
5302410020_B(config-if)#no shu
5302410020_B(config-if)#no
shutdown
5302410020_B(config-if)#exit
5302410020_B(config)#int
5302410020_B(config)#interface fa
5302410020_B(config)#interface
fastEthernet 0/0
5302410020_B(config-if)#ip add
5302410020_B(config-if)#ip
address 192.168.2.1 255.255.255.0
5302410020_B(config-if)#exit
5302410020_B(config)#exit
5302410020_B(config)#rou
5302410020_B(config)#router ospf
10
5302410020_B(config-router)#net
5302410020_B(config-router)#network
172.20.20.0 0.0.0.3 area 0
5302410020_B(config-router)#net
5302410020_B(config-router)#network
192.168.2.0 0.0.0.255 area 1
5302410020_B(config-router)#exit
5302410020_B(config)#exit
5302410020_B#
%SYS-5-CONFIG_I: Configured from
console by console
5302410020_B#copy ru
5302410020_B#copy running-config
st
5302410020_B#copy running-config
startup-config
Destination filename
[startup-config]?
Building configuration...
[OK]
Leave a Reply